Other heating products


Quartz infrared emitters Flexible silicone elements Air heaters Brake resistance
Quartz infrared emitters Flexible silicone elements

Air heaters Brake resistance
Refractory plates Insulating _blankets Resistance heaters cylinder type
Refractory plates Insulating _blankets Resistance mounted on cylindrical barrels








Refractory plates

REFRACTORY PLATES

Volton repairs and manufactures ceramic refractory plates that meets your needs. Our plates remain an informed choice for applications that are not suitable for either convection or conduction.


AIR HEATING :



✓  High temperature oven
✓  Autoclaves
✓  Cooking or drying tunnels

•  Nickle-chrome or Kanthal A-1 leads
•  Made to order refractory cement plate
•  Multiple zone option
•  Manufactured with Ceramic fiber insulation also available
•  Maximum temperature → up to 2200�F (1200�C)
•  Voltage: 120V � 600V single or three phase



ELEMENT SHAPES AVAILABLE :


•  Flat
•  Cylindrical
•  Half-Cylindrical

LEAD TYPE :
•  Single
•  Double Braided






Flexible Silicone Elements

FLEXIBLE SILICONE ELEMENTS

The flexible silicone elements are used in applications that need to maintain a low heating temperature, easily installed, along with different shapes and/or dimensions available.

In the case of applications requiring a higher than extreme low heat temperature, the silicone insulation can be replaced by another type of material such as Kapton (max 600�F / 315�C).


EXEMPLE OF APPLICATIONS :

✓  Heating of solids, liquids or gases (various industries)
✓  Heating of tanks and other recipients
✓  Fragile products needing small density on the area to heat

•  Fast heat transfer and uniformly dispatched
•  Resistant towards rough conditions (cold and humidity)
•  Strongly constituted → can support many folds without harming the resistance
•  Available in complexes shapes or/and dimensions
•  Also offered shaped as a belt for wide diameter

OPTIONS :
•  Sticky on one or both sides
•  Integrated thermostat
•  Holes
•  Cut-outs
•  Springs
•  Velcros for installation



•  5 to 10 watts maximum per square inch
•  Max. operating temperature 428�F (220�C)
•  Heating Nickel & Chrome Ribbon with Silicon Sleeve
•  Standard 10" Silicone or Teflone leads or Power Cable with Plug
•  Voltage: 12V to 240V Single or Three phase






Quartz infrared emitters

QUARTZ INFRARED EMITTERS

We manufacture radiant panels and quartz made to order per your specifications. Volton manufacture and repairs the quartz infrared emitters by replacing the resistance.

These provide an instant heat and a quick cool down. They possess an excellent uniform emission that permits to treat small distances that need to be worked on. Quartz is very resistance to a wet environment and simple to use.


IN INDUSTRIES SUCH AS :

✓  Thermoforming
✓  Folds of polymer leaf
✓  Drying and cooking of industrial products
✓  Drying of food products

•  Kanthal A-1 heated radiant lead coiled and installed in a quartz tube
•  Mid-infrared wavelength → 1.4 � 3�m
•  Outside diameter → 3/8", 1/2", 5/8"
•  Maximum length up to 102"
•  Horizontal mounting
•  Ceramic end caps
•  Post-terminal or Lead exit
•  Voltage: 120V to 600V






Air heaters

AIR HEATERS

In collaboration with our research and development department, Volton manufactures and repairs high power electric air heaters for the high temperature industrial application.


EXEMPLE OF APPLICATIONS :

✓  Thermic metal treament
✓  High heat temperature by convection

OFFERED WITH :

•  Heating ribbon NiCr80/20
•  Heating Coils NiCr80/20 or Kanthal A-1
•  Incoloy Tubular Elements



•  Large caliber heating ribbon or coil, formed and supported by cylindrical ceramic insulators in a robust stainless steel enclosure.
•  A design that facilitates future reconditioning of the heating elements.
•  We offer a reconditioning service (heating elements / insulators / insulation) of all type of air heaters, no matter what make they are.
•  Voltage: 240V � 600V






Break resistance

BRAKE RESISTANCE

The brake resistance are used to dissipate the excess energy generated at start-up or shut-down of electric motors. They protect the motor and its power circuits, in addition helps to reduce energy level spikes when starting.

Volton repairs and manufactures brake resistance mounted on a ceramic core designed to dissipate heat efficiently.


EXEMPLE OF APPLICATIONS :

✓  A crane
✓  Lifters
✓  Engine brakes DC and AC

•  Dimensions → 12.25" � 24.25" long •  Installation with or witout mounting legs

TECHNICAL SPECIFICATIONS OF OUR STANDARD MODELS :








Insulating _blankets

INSULATING _blankETS

The insulating _blankets reduces the number of kilowatts/hour used to obtain substantial energy savings. According to studies, your investment will have a payback in less than one year.

If necessary, the insulating covers can be equipped with silicones or heating cables.




IN INDUSTRIES SUCH AS :

✓  Plastic injection and extrusion
✓  Global industrial

•  Insulated _blankets for high and low temperatures -58�F to 2192�F (-50�C to 1200�C)
•  Custom-built to your needs
•  easy to install and uninstall → (standard)
•  Fire and contamination proof
•  Standard insulation ceramic wool → 1" thick (standard)
•  Increased safety for your employees
•  The heating element surrounded by a _blanket will last longer because they are less solicited
•  Holes and cut-outs (optional)



RESISTANT TO :

•  Water
•  Oil
•  Chemical products
•  Etc.







Resistance mounted

RESISTANCE MOUNTED ON CYLINDRICAL BARRELS

We repair and manufacture, per your specifications, the resistance on cylindrical barrels.

The resistance on cylindrical barrels can be installed in an open air configuration, but generally inserted in air tight tubes which are used to heat liquids or corrosive gases.


EXEMPLE OF APPLICATIONS :

✓  Ovens
✓  Autoclaves
✓  Heating tunnels
✓  Industrial fryer

TERMINAISON :

•  Threaded post terminals
•  High temperature leads



•  The coil heater functions by convection in the air and/or by radiation and can reach temperatures up to 1470�F / 800�C in very specific conditions.
•  Standard dimensions → 1.25", 1.80", 2.25", 3.10" (other dimensions available)
•  Nickel-chrome coiled resistance
•  Cylindrical ceramics supported by a stainless steel rod
•  Voltage: 120V to 600V single or three phase