Volton est le distributeur exclusif au Québec des produits ITC.
All our temperature modules have the anti-arcing feature and
your operation can be selected in Fahrenheit or Celsius.
The S20-D2 and S20-D2C can be automatically or manually
operated.
The multi-functions digital readout, displays actual temperature
as well as error codes such as open triac / heater and shorted
triac. Individual LED’S indicate manual operation, soft start,
high / low temperature, open and reversed thermocouple, as well
as a center yellow LED which indicates power output to the mold.
The S20-D3C Temperature Control Module designed for those applications where ease of operation, cost and features are of concern. It has been intelligently designed, making it easy to set up and simple to use, while maximizing productivity, and providing an exceptional range of features, in order to meet the rigorous requirements of today’s plastic industry. The Microprocessor based circuitry of the S20-D3C performs a full array of diagnostic and operational functions. Set-point temperatures are automatically maintained by means of the fully Adaptive-auto-tuning PID/FUZZY LOGIC function.
The µTC-15a has a dual digital display which provides
readouts of both setpoint and process tempe-ratures. Switchable
PID or Fuzzy (amperage control) provides precise control under
a variety of proces-sing conditions and the built in audible
alarm combined with descriptive error codes efficiency alert
the operator to specific problems.
The µATC-15 temperature control module is a fully microprocessor
based instrument which has been intelligently designed for hot
runner mold temperature control applications where advanced
operational and diagnostic features are needed.
The UATC-20 Temperature Control Module has been designed with the latest in microprocessor technology for Hot Runner Applications where state-of-the art operational and diagnostic features are a requisite. There are many little features, such as gold-plated edge connector, incorporated within the UATC-20 which greatly enhances its operation. The UATC-20 is a rugged, simple to set-up and easy to use module which is versatile enough to move from project to project, with all the sophistication necessary for today’s demanding molding requirements.
An interesting feature of the µATC-15 is its capacity to provide
a snapshot of the operation of the heating zone by displaying
amperage draw. The µATC-15 also has the ability to adjust maximum
amp draw to a point just above the maximum wattage of the heater.
When the controller detects a current which is greater than
that value, it will sound an alarm so the offending component
can be replaced.
To get more information on all the features of our different
modules, please contact our sales department.
INTELLIGENT SERIES
The intelligent series microprocessor-based temperature control
modules are designed using future technologies for tomorrow’s
plastic industry’s stringent molding requirements. These modules
are fully automatic self-tuning controls using selectable AccruComp
Cycle or PID power control with fuzzy logic to make intelligent
decisions for reliability, precision and minimizing electrical
stress on heaters. These controls come with their state-of-the-art
touch key front panel controls with universal symbols, Ramp
Start to prolong heater life and dry out of heater moisture,
open loop (manual), closed loop (automatic), built in diagnostics
with alarms, energy efficient and user friendly. |
