• Features
  • Applications
  • 3D Drawing configuration tool
  • Termination types
  • Box
  • Fixation

Features

Ceramic band heaters are custom-made in our shop to withstand higher conditions requirements than those of mica bands. They also offer a longer service life and may reach 1500º F. They are repairable, regardless of the original manufacturer.

The nickel-chrome 80/20 heating wire used resists high temperatures better than the 60/15 traditionally used; increasing durability of your ceramic band heaters.

Our ceramic bands collar feature's a ceramic fiber insulation 1/2" compared to 1/8"-1/4" for the competition. The energy saving is over than 30%!

Specs:

  • Built to reduce heat loss and maintain constant temperature.
  • Made from stainless steel, the collar’s outer layer is corrosion-resistant.
  • Nickel-chrome 80/20 heating wire that withstands higher temperature than traditionally used 60/15, and ensure longer service life.
  • Insulating 1/2" ceramic fiber placed in the collar shows a substantial energy savings (1" on demand)
  •  With optional thermocouple hole
  •  Single-phase or three-phase
  •  Double voltage
  •  Partial bands
  •  Special designs available
  •  Etc.

Applications

  • Plastics industry (moulding, injection, extrusion)
  • Duct heating
  • Heating of any cylindrical item

3D Drawing configuration tool

Volton offers you the possibility to create your 3D band heater and send it to us! We encourage you to follow the tutorial to help you get the best of this tool : https://voltondesign.com/

Termination types

Type B

Two post terminals on the same side

Type C

Leads with a spring protection

Type D

Terminal box with post terminals inside

Box

Standard box

Dimensions of the heater band

Width

Less than 2’’

2’’ à 6’’

More than 6’’

Diameter

Less than 4’’

3.5’’ x 1.5’’ x 2.00’’

3.5’’ x 2’’ x 2’’

3.5’’ x 3.5’’ x 2’’

4’’ à 8’’

5’’ x 1.5’’ x 2.3’’

3.5’’ x 2’’ x 2’’

3.5’’ x 3.5’’ x 2’’

More than 8’’

5’’ x 1.5’’ x 2’’

3.5’’ x 2’’ x 1.5’’

3.5’’ x 3.5’’ x 1.5’’

 

Low profile

With post terminals

Without terminals

Standard

Special

Standard

Special

3.5’’ x 2’’ x 1.25’’

2’’ x 2’’ x 1’’

1.75’’ x 1.5’’ x 1.25’’

1.75’’ x 1’’x 1’’

 

Euro plug

1 coil

2 coils

2’’ x 1’’ x 1.5’’

2’’ x 2’’ x 1.5’’

 

3 phases boxes

Dimensions of the heater band

Width

Less than 2’’

2’’ à 6’’

Plus de 6’’

Diameter

Less than 6’’

7’’ x 2’’ x 2’’

5’’ x 2’’ x 2.3’’

5’’ x 3.5’’ x 2.3’’

5’’ x 5’’ x 2’’

6’’ and more

7’’ x 2’’ x 2’’

5’’ x 2’’ x 2’’

5’’ x 3.5’’ x 2’’

5’’ x 5’’ x 2.3’’

Fixation

Fixation

  Tabs/Flange
  Barrel nuts


Sleeve protection

Stainless steel braid (SSB) Armor cable (BX)
Quote request Print