- Features
- Applications
- 3D Drawing configuration tool
- Termination types
- Box
- Fixation
Features
Ceramic heating bands are custom-made in our factory to withstand more demanding conditions than mica heating bands. They also provide greater longevity and can reach up to 1500º F. They are repairable, regardless of the original manufacturer.
Materials and Construction
Made with stainless steel, the collar coating is corrosion resistant.
Nickel-chrome 80/20 heating wire goes to higher temperature than the 60/15 (traditionally used) and thus ensures greater longevity.
The added 1/2" ceramic fiber insulation in the collar coating provides substantial energy savings (1" on request).
The collars of the ceramic bands are equipped with 1/2" ceramic fiber insulation, for an energy savings of over 30%.
Specifications
- Built to reduce heat loss and maintain a uniform temperature.
- With optional thermocouple hole
- Single-phase or three-phase
- Dual voltage
- Partial bands
- Special configurations available
- CSA & UL
Applications
- Heating of any cylindrical part
- Heating of ducts
- Injection, extrusion and blow molding fields
The collars of our ceramic bands are equipped with 1/2 inch ceramic fiber insulation, which is thicker than that of the competition (1/8 to 1/4 inch). This provides an energy savings of over 30%.
3D Drawing configuration tool
Volton offers you the possibility to create your 3D band heater and send it to us! We encourage you to follow the tutorial to help you get the best of this tool : https://voltondesign.com/
Termination types
Type B |
Two post terminals on the same side |
Type C |
Leads with a spring protection |
Type D |
Terminal box with post terminals inside |
Box
Standard box | ||||
---|---|---|---|---|
Dimensions of the heater band |
Width |
|||
Less than 2’’ |
2’’ à 6’’ |
More than 6’’ |
||
Diameter |
Less than 4’’ |
3.5’’ x 1.5’’ x 2.00’’ |
3.5’’ x 2’’ x 2’’ |
3.5’’ x 3.5’’ x 2’’ |
4’’ à 8’’ |
5’’ x 1.5’’ x 2.3’’ |
3.5’’ x 2’’ x 2’’ |
3.5’’ x 3.5’’ x 2’’ |
|
More than 8’’ |
5’’ x 1.5’’ x 2’’ |
3.5’’ x 2’’ x 1.5’’ |
3.5’’ x 3.5’’ x 1.5’’ |
Low profile | |||
---|---|---|---|
With post terminals |
Without terminals |
||
Standard |
Special |
Standard |
Special |
3.5’’ x 2’’ x 1.25’’ |
2’’ x 2’’ x 1’’ |
1.75’’ x 1.5’’ x 1.25’’ |
1.75’’ x 1’’x 1’’ |
Euro plug | |
---|---|
1 coil |
2 coils |
2’’ x 1’’ x 1.5’’ |
2’’ x 2’’ x 1.5’’ |
3 phases boxes | ||||
---|---|---|---|---|
Dimensions of the heater band |
Width |
|||
Less than 2’’ |
2’’ à 6’’ |
Plus de 6’’ |
||
Diameter |
Less than 6’’ |
7’’ x 2’’ x 2’’ |
5’’ x 2’’ x 2.3’’ 5’’ x 3.5’’ x 2.3’’ |
5’’ x 5’’ x 2’’ |
6’’ and more |
7’’ x 2’’ x 2’’ |
5’’ x 2’’ x 2’’ 5’’ x 3.5’’ x 2’’ |
5’’ x 5’’ x 2.3’’ |
Fixation
Fixation
![]() |
Tabs/Flange |
![]() |
Barrel nuts |
Sleeve protection
![]() |
Stainless steel braid (SSB) | ![]() |
Armor cable (BX) |